Simply look at the Transaxle bell-housing and it is staring you.
Jan 06, this is the removal only. be sure to watch part 2 on how to install the starter bushing. i include all the easy tools to use to install it with easeMissing: Tyrone GA.
To remove the old 12 Volt Starter Bushing, tap the old Bushing using a 7/16ths tap If the Bushing will not remove by pulling on the threaded tap, install a long bolt of the same threads, place vise grips at the bolt head and use a hammer to tap on the nether side of the vise grips. This should loosen and remove the bushdrop.clubted Reading Time: 1 min. Jan 31, Volkswagen engineers designed a Bushing Puller for the 6 Volt Starter Bushing and another for the 12 Volt Bushing.
Let’s look at the Bushing Location first. In order to do this, I have a VW transmission which has been gutted and cleaned for the purpose. The first picture shows the Long-bodied Starter in bushdrop.clubted Reading Time: 4 mins.
Apr 30, How to easily get that [email protected]? starter bushing out, just be careful NOT to drop anything down in there!Missing: Tyrone GA. VW Starter Bushing Puller Tool for 12 Volt Bushing. Part Number:Fits your vehicle This product was made to fit the stock. Does not fit This product does not fit the stock. Quantity. Add to Cart Pre-Order.
As low asper month. Shipping. Spendmore for Free Shipping. 5/5(1). Apr 13, Just pull the starter and anything else in the way (Heater tubes). If you have a 6 volt starter use a 1/2" x 13 TAP to screw into the bushing to remove it. If you have a 12 volt starter use a 7/16 x 14 TAP. If you have a tranny from a 6 volt car but have a 12volt starter it will have a conversion bushing and that takes a 7/16 x 14 TAP bushdrop.clubg: Tyrone GA.